===== 3D Printing Files =====

The following files are .stl files which are editable using 3D editors, or can be printed as they are. 

==== Measurement Node ====

description

  * Housing for the LoRa Node \\ {{lora-node-housing_big.stl|lora node housing}}
  * Lid Mount for LoRa Node inside the housing  - three versions for (1) battery powered, (2) solar powered, and (3) relay version \\ {{lid-mount-batterie-v3.stl|battery version}} \\ {{lid-mount-solar-v2_new_charger_pcb_.stl|solar version}} \\ {{lid_mount_relay.stl|relay version}}
  * Mount for SCL3300 onto the PCB (bottom, middle and top part) \\ {{scl3300_pcb_mount_p1_v4_bottom_part.stl|bottom part}} \\ {{scl3300_pcb_mount_p2_v3_middle_part.stl|middle part}} \\ {{scl3300_pcb_mount_p3_v2_top_part.stl|top part}}

==== Subsurface Probes, Low-Cost Inclinometer ====

text

==== Low-Cost Extensometer ====

text

==== Construction Tools ====